The Arise has
two models.
The Arise I has an aluminum frame and ships in two cases. The Arise II has a
aluminum frame and packs in one oval case.
Click here to view detailed photos
of our pop up systems.
ARISE I
ARISE II
Popup systems have a one piece frame that "pops up" to
become the wall. Vertical bars with magnetics are attached to the frame. Fabric or photo
panels are hung and stay in place with magnets. Pop-ups are very popular with women
because there is no lifting and the graceful curves are very esthetic. It is also the best
system for displaying large photo murals. The fabric panels can be replaced with a photo
so there are no individual items to Velcro to the booth, speeding the setup.
These frames are strong
and trouble free.
Interior and exterior shelves are available. Something to remember when comparing
pop-ups, the fewer parts in the hub, the more trouble free the frame.
The Arise system
has a one piece hub with aluminum bars that bolt to the hubs with a
phillips head bolt. This makes
them easily repairable if damaged in shipping.
The back sides of pop-ups an also be covered with fabric for island
booths.
Have you ever gone to a show and seen popup displays with
the endcaps off? These are usually pop up displays that have a frame only
8" deep. This sharp curve makes the magnets on the endcaps to weak to hold. Most
displays can't be moved after you have everything setup. If you drag it a couple feet to
set into place you end up re-aligning the panels and graphics. This always frustrated me! With
our pop-ups this won't happen. |
Click for
major
brand popup comparison
The Arise can hold a 75
lb. monitor on the frame for video and software presentations. The monitor kit will not
ship in the Arise II case although the frame will support the weight.
 Overlay header fits between the endcaps.
 Wrap header fits from the back of one endcap to the back of
the other. Both velcro to the fabric panels.
The Arise popup can have a section taken out to change from
10 to 8 foot wide.
|